Main line: 08 9302 2006 email@example.com
Spares: 08 6305 0660 firstname.lastname@example.org
The standard version of this fertiliser spreader is equipped with two patented spreading devices whose fitment is rapid and easy. These devices are installed at the end of the Oscillating Tube. The Silvan oscillating spreader is designed for precise application of fertiliser and seed at medium to low rates. The oscillating spreader will accurately apply product in twin bands (left and right) beneath trees in orchard whilst also being able to apply full coverage for top dressing. (NB. Band pattern spreading will still allow some product to spread in centre.)
Construction: The hopper is manufactured from non-corrosive U.V. stabilised impact resistant polyethylene. The support frame is constructed of tubular steel. Metering plates are stainless steel.
Drive Line: P.T.O. drive shaft with approved safety cover, continuous stroke fly wheel,rubber shock absorber, counter balanced crank driving oscillating spout and agitator. No gear, chain or belt drive.
Control: One lever manual control for amount to be applied. A removable lever is supplied for adjusting the oscillating spout spreading angle, and a spout fitting is supplied to allow banding.
Attachment: Cat. I and II three point linkage.
Regulation Lever: Selector with 15 opening positions allows precision in preselected dosages.
Dosages System: Designed to reach precise regulation of the product even in the case of small quantities.
Transmission Group: Composed of a continuous stroke regulator that allows variation of the tube firing stroke. This makes is possible to vary the spreading amplitude from approximately 6 metres to a maximum of approximately 24 metres.
Fertiliser Spreader: Oscillating tube is equipped with two agitators:
Short: for granular fertilisers and seeds. Long: for organic and pulverised fertilisers (thomas scoria, calcium cyanamide,polline, humus etc.)
This product is not available for purchasing online. Please make an enquiry for purchasing information.